ChargeSafe Magnetic Trickle Charger Adapter
Effortless Charging with ChargeSafe: The Magnetic Solution for Safe, Secure Vehicle Battery Maintenance.
Keep Charging
Storing a motorized vehicle is always a challenge due to parasitic or natural depletion of battery capacity. Both late and classic vehicles have issues with maintaining battery charge when they are not used often. Compatible with all types of chargers for gas and diesel vehicles - cars, automobiles, motorcycles, dirt bikes, scooters, mopeds, lawn mowers, ATVs, UTVs, tractors, trucks, SUVs, RVs, campers, trailers, boats, PWCs, jet skis, snowmobiles, golf carts, classic cars, and more.
Wide Range of Applications
Amperage rated for any trickle charger - Designed for 6-volt and 12-volt sealed lead-acid automotive, marine, RV, powersport, and deep-cycle batteries, including flooded, gel, AGM, SLA, VRLA and maintenance-free, plus lithium-ion batteries (lifepo4).
Premium Quality
- LED indicator to verify proper connection, Durable construction to withstand outside elements. Made of durable ABS Plastic with ultrasonically welded seams. Comes with mounting bracket and 3M VHB tape for hard mounting the battery side connector.
- Self-aligning rare earth magnets draw in the connector as it gets close making the connection properly just by feel.
- ChargeSafe features a universal SAE connector. If your charger is already equipped with one, you’ll just need to plug it in. An SAE connector converter must be purchased from your charger manufacturer if hardwire method is not desired.
ChargeSafe Magnetic Trickle Charger Adapter
Features
Durable
Housings are made out of durable ABS plastic material with ultrasonically welded seams. Water resistant to withstand outside elements.
Weathersafe
Battery Side Connector has a rubber cover to protect terminals from outside weather conditions.
Universal
Battery Side Cable (BSC) has a 6 ft. paired wire with ring terminals and a fuse holder in-line for short circuit protection. May be lengthened with the same 16 gauge wire pair or larger with a proper connector.
It also features a universal mounting bracket for installation on your vehicle using adhesive or screws (supplied).
SAE Connector
Charger Side Cable (CSC) features a 5 ft. paired wire with an SAE universal connector which can be adapted to any aftermarket charger
Safe
When magnetic connection is made, the LED will light up to indicate proper connection. Your aftermarket trickle charger will also indicate proper charging sequence.
Intentional Design
ChargeSafe's self-aligning rare-earth magnets draw in the connector as it gets close ensuring the correct polarity every time. It will even connect itself properly just by feel.
About ChargeSafe
Technical Information
Specs
Connection mechanism: Magnetic with SAE universal Connector to battery trickle charger*
Max. current load** : 10 A
Max Voltage** 24 VDC
Battery side connector: Approx. 49mm x 35mm x 28mm
Charger side connector: Approx 49mm x 17mm x 28mm
Mounting bracket: Approx 20mm / 20mm
Warranty: 1 year
*) a universal connector converter can be purchased from your charger manufacturer
**) damage to internal electronic components can occur when charger voltage exceeds maximum current and voltage rating.